Page 124 - My FlipBook
P. 124
Finishing the inlay should be accomplished as a subsequent opera-
tion, which should not be attempted until the cement has thoroughly
hardened. Very little finishing will be required if proper care is exer-
cised in applying the porcelain. All margins of porcelain overhanging
the enamel are to be removed with fine grit stones (Fig. 5A), and the
inlay should then be polished with cuttlefish disks and Arkansas stones
(Fig. 5C). These stones should be.kept thoroughly moistened and used
with a moderate degree of pressure.
[20
